Uniden GPS, Uniden Cable, Homepatrol Ignores
(1 viewing) (1) Guest
  • Page:
  • 1

TOPIC: Uniden GPS, Uniden Cable, Homepatrol Ignores

Uniden GPS, Uniden Cable, Homepatrol Ignores 23 Aug 2012 18:36 #10077

  • HP1User
  • ( User )
  • NOW ONLINE
  • Fresh Boarder
  • Posts: 7
  • Karma: 0
I just received a BC-GPSK and connector cables, so trying GPS for the first time. Connected the male DB9 to the female DB9. Plugged in the power. The indicators on the power plug and GPS both light up. Plugged into the HP-1 and cycled power. The GPS light does not come on the screen of the HP-1 and going into the settings, it shows "Ignore GPS". Checked all connections and repeated. Firmware 2.03 is loaded.

Can someone point me to a troubleshooting guide? Thanks!!

Re: Uniden GPS, Uniden Cable, Homepatrol Ignores 23 Aug 2012 19:03 #10078

  • HP1User
  • ( User )
  • NOW ONLINE
  • Fresh Boarder
  • Posts: 7
  • Karma: 0
I disconnected the 2 DB9's and plugged one into the computer to see if the GPS was sending data (it was). Re-connected the DB9's and the HP-1 immediately recognized it. I had them tightly secured before, so no idea why it wasn't working before.

No matter, it's working now and that is what counts! :)
  • Page:
  • 1
Moderators: Atomic B Claw, Torgo
Time to create page: 0.86 seconds